GET A PCBA OFFICIAL QUOTE
Submit your quote request now with
PCB file and BOM list,
and you will be offered quotation within 48 hours via email.
PCBA FILES REQUESTED
If you need PCBA service in PCBSEA,
some PCBA files are required.
Three Special Reminders for PCBA
01. Parts Overages
Proper SMT machine setup and operation requires parts overages. Unused and excessive parts
supplied
by you or purchased by us will be packaged and returned to you with the assembled boards.
SMT parts which are not supplied on the reels should be on one continuous strip of tape.
If you need to assemble the same SMT part in different boards, do not cut them into strips,
please keep them in the continuous strip of tape or on the reels.
Resistors, Capacitors, Diodes (0603, 0805, 1206, 2225, SOT, SOD, MELF - packages) require a
minimum
of 50 pieces and have to exceed the required quantity by 30 pieces. (E.g. 40 pieces will require 70 additional pieces –
this meets our minimum of 50 pieces plus 30 pieces over assemble quantity requirement).
Resistors, Capacitors, Diodes (0201, 0402, MiniMelf, miniature packages) require a minimum
of
100 pieces having to exceed the required quantity by 50 pieces.(E.g. 80 pieces will require 130 additional pieces -
this meets our minimum of 100 pieces plus 50 pieces over assemble quantity required).
A small number of excesses (1-5 pieces based on the total quantity of assemblies) are
requested
for
expensive parts such as IC, BGA, QFP, Connectors, etc., this will ensure smooth assembling and
shipping of your assembled boards on time.
For further information contact us at service@PCBSEA.com or seek help through our 24 hour online customer service.
02. Panelization
If your PCB dimensions are smaller than 50mmx100mm or if your PCB is of any shape
(other than rectangle) your boards must be panelized in an array for assembly.
As we also fabricate your PCB for you; once we start fabricating your board we will have the panelization file (solder paste data),
we will transfer the data to our PCBA department to create the stencil which will match the panelized PCB.
03. Break-away Rails (Break-away Tabs)
If the clearance between the board edges and copper features is less than 3.5mm (138mil),
or
your boards need to be panelized for some reason,
break-away rails (Break-away tabs) must be added at the two longer parallel
edges of the boards to ensure that the boards can be assembled by the machine.
PCB ASSEMBLY FAQ

Q: Who is PCBSEA.com?
Q : Do you accept to solder the boards that are not made by PCBSEA.com?
Q: What files and documents do you request for my PCBA orders?
Q: What is centroid?
Q: How do you request for the shipping and marking of the parts for the consigned or kitted order?
Q: Do you offer turnkey PCB assembly service?
Q: Do you assemble BGA? Are there any special requirements for this?
Q: How do you quote the total price of PCBA service?
Q: When does the turn-time begin?
Q: 10. Is your assembly RoHS compliant?
Q: What are your PCB assembly standards?